From: Akkermans, Maurice (maurice.akkermans@tellabs.com)
Date: Mon Aug 02 2004 - 06:15:43 EDT
Hi,
I have a DS20E that just died. Power is ok but I do not get any prompt
on the serial console nor on the vga console. RCM reports everything OK.
The halt LED is yellow and pressing the halt button doesn't change
anything.
Removed each CPU ones but no change.
Any ideas?
Mvh.
Maurice
-----------------------------------------
============================================================ The
information contained in this message may be privileged and confidential
and protected from disclosure. If the reader of this message is not the
intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
reproduction, dissemination or distribution of this communication is
strictly prohibited. If you have received this communication in error,
please notify us immediately by replying to the message and deleting it
from your computer. Thank you. Tellabs
============================================================
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:05 EDT