From: Peter.Stern@weizmann.ac.il
Date: Tue Jul 20 2004 - 10:32:44 EDT
I bought a new 36GB disk, put it into another workstation, labeled the
disk, made the AdvFS domains and filesets and restored the system from
the workstation with the broken disk (yes the disk is broken).
Then I replaced the broken system disk with the new one and tried to
boot. I get the same message as before:
>>> (boot dka0.0.0.6.1 -flags a)
>>> failed to open dka0.0.0.6.1
What am I missing here?
>>> sho dev
doesn't show the disk.
In the workstation where I did the restore, I jumpered the disk to be
rz1. In the original workstation I left it as rz0 as was the original
disk.
Regards,
Peter
Forwarded message:
> From peter Sun Jul 11 19:05:49 2004
> Subject: SUMMARY: XP1000 won't boot
> To: tru64-unix-managers@ornl.gov
> Date: Sun, 11 Jul 2004 19:05:49 +0300 (IDT)
> From: Peter.Stern@weizmann.ac.il
> Reply-to: Peter.Stern@weizmann.ac.il
> X-Mailer: ELM [version 2.5 PL3]
> Content-Length: 1490
>
> Thanks to the three Toms:
> Thomas Sjolshagen and Dr Thomas Blinn of HP and Tom Linden.
>
> As I suspected it is either a bad disk or a bad SCSI controller, most
> probably the disk. I will carry out the suggestions offered to see
> which it is (e.g. add another disk to see if it is recognized).
>
> Regards,
> Peter
>
> Forwarded message:
> > From tru64-unix-managers-owner-Peter.Stern=weizmann.ac.il@sws1.ornl.gov Sun Jul 11 18:04:16 2004
> > Delivered-To: tru64-unix-managers@sws1.ctd.ornl.gov
> > Sender: tru64-unix-managers-owner@ornl.gov
> > Followup-To: poster
> > Precedence: bulk
> > X-Spam-Status: No, hits=-4.7 required=5.0
> > Date: Sun, 11 Jul 2004 18:03:41 +0300 (IDT)
> > From: Peter.Stern@weizmann.ac.il
> > Subject: XP1000 won't boot
> > To: tru64-unix-managers@ornl.gov
> > Reply-to: Peter.Stern@weizmann.ac.il
> > Message-id: <200407111503.SAA29045@chemphys.weizmann.ac.il>
> > MIME-version: 1.0
> > X-Mailer: ELM [version 2.5 PL3]
> > Content-type: text/plain;
> > charset=us-ascii
> > Content-transfer-encoding: 7bit
> > X-ESAFE-STATUS: Mail clean
> > X-ESAFE-DETAILS: Clean
> >
> > Hi:
> >
> > We have a five year old Compaq Professional Workstation XP1000 (Tru64
> > Unix v4.0f) which crashed and won't reboot. It gives the message:
> > (boot dka0.0.0.6.1 -flags a)
> > failed to open dka0.0.0.6.1
> >
> > Any ideas?
> >
> > Thanks,
> > Peter
> >
> > Peter Stern
> > Chemical Physics Department
> > Weizmann Institute of Science
> > 76100 Rehovot, ISRAEL
> >
> > email: Peter.Stern@weizmann.ac.il
> > phone: 972-8-9342096
> > fax: 972-8-9344123
> >
>
>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:04 EDT