From: rob.leadbeater@lynx.co.uk
Date: Tue Jul 13 2004 - 02:50:23 EDT
Hi Managers,
Thanks to all that responded. The concensus is that this will work fine without any problems.
There are a couple of things to watch out for:
Be careful with the zoning of the SAN switches and volume access. (Thanks to Omer Uyar).
Don't duplicate IDENTIFIERS between the controllers. (Thanks to Kevin Raubenolt).
On the zoning front, our vendor has recommended having two separate zones, one for the HSG80 and the servers, one for the EVA5000 and the servers.
Regards,
Rob
> -----Original Message-----
> From: tru64-unix-managers-owner@ornl.gov
> [mailto:tru64-unix-managers-owner@ornl.gov] On Behalf Of
> rob.leadbeater@lynx.co.uk
> Sent: 12 July 2004 14:24
> To: tru64-unix-managers@ornl.gov
> Subject: Simultaneous connection to HSG80 and EVA5000 SAN
>
>
>
> Hi Managers,
>
> I'm in the process of migrating the data disks of a couple of
> DS25's from a HSG80 to an EVA5000.
> Machines are running 5.1B PK4.
>
> I'd planned to move the data by addvol(ing) the EVA5000 disk,
> and then rmvol(ing) the HSG80 disk.
>
> Does anyone know of any issues connecting a host to two
> different storage controllers at the same time ?
>
>
> Regards,
>
> Rob
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:03 EDT