From: Steven Frost (Steven.Frost@powerco.co.nz)
Date: Thu Jun 17 2004 - 16:55:47 EDT
Thanks to Udo Grabowski ,Thomas Blinn and Iain Barker
The ddr.dbase entries look OK
After re-instating the old DLT4 unit I have noticed that the SCSI terminators are different - active on the TZ89 and passive on the SDLT
So next time I will swap these and check it out again. It's a dev box so not a big issue at the moment.
Thanks
#####################################################################################
This e-mail message has been scanned for Viruses and Content and cleared
by MailMarshal
#####################################################################################
****************************************************************************************************************************
CAUTION: This email and any attachments may contain information that is confidential. If you are not the intended recipient, you must not read, copy, distribute, disclose or use this email or any attachments. If you have received this email in error, please notify us and erase this email and any attachments. You must scan this email and any attachments for viruses.
DISCLAIMER: Powerco Limited accepts no liability for any loss, damage or other consequences, whether caused by its negligence or not, resulting directly or indirectly from the use of this email or attachments or for any changes made to this email and any attachments after sending by Powerco Limited. The opinions expressed in this email and any attachments are not necessarily those of Powerco Limited.
****************************************************************************************************************************
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:01 EDT