MSL6000 tape library

From: mahmod kokaje (mkokaje2000@yahoo.com)
Date: Thu Jun 17 2004 - 03:34:27 EDT


Dear managesrs,

I fased problem on MSL6000 tape library Withe two DLT
tape drive,

after connect the A.C power to it it continue boot
after finish the self test it displays the following
message on its display,

"one or more drive are not installed"

note the devices on:

(SCSI BUSS0) is:

"there are no devices attatched to this bus at this
time"

(SCSI BUSS1) is:

protocol bus device type state target Id
LunID

SCSI 1 CHGR up 0 0

SCSI 1 TAPE up 1 0

I check SCSI cables its ok,

I replaced between tow drives the broblem as it,

one or more drive not installed,

I return the configuration to factory and reconfig it
the problem is same,
 please advise
mahmod

 

                
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:01 EDT