SUMMARY: TruCluster won't boot (quorum disk in use)

From: Stephane.Moser@gs-vbs.admin.ch
Date: Tue Jun 01 2004 - 05:42:53 EDT


Hi

The problem is/was a cluster interconnect Problem. As cluster interconnect I
tried to use a DEGXA-TA Gigabit Ethernet. I noticed that the cluster
interconnect (bcm0) goes up at the begin of the boot process and a little
bit after it goes down again (see below).

So I decided to use another cluster interconnect (COMPAQ Intel 82559 (10/100
Mbps) 3X-DE602-BB) and with this interconnect the cluster is working.

I don't know what is the problem with the DEGXA-TA Gigabit Ethernet but I
have found a workaround for this problem.

I'm still interested about a solution for the DEGXA-TA Gigabit Ethernet. I
opened a call at HP.

Thanks a lot for the people that help me to try to solve this problem.

Best regards,

Stephane

##### bcm: DEGXA driver V1.0.21 NUMA lanlog ==> Link up to other
member #####
failed configuring ev7_ocla subsystem
Alpha boot: available memory from 0x8216000 to 0xfffee000 Compaq Tru64 UNIX
P5.1B (Rev. 608); Mon Sep 29 03:54:39 EDT 2003 physical memory = 4096.00
megabytes.
available memory = 3965.84 megabytes.
using 15646 buffers containing 122.23 megabytes of memory Master cpu at slot
0 Starting secondary cpu 1 Firmware revision: 6.6-22
PALcode: UNIX version 1.92-33
AlphaServer DS25
pci0 (primary bus:0) at nexus
isa0 at pci0
gpc0 at isa0
gpc1 not probed
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
ee0 at pci0 slot 8
ee0: COMPAQ Intel 82559ER (10/100 Mbps) Ethernet Interface
ee0: Driver Rev = V1.0.23, Chip Rev = 9, hardware address: 00-02-A5-20-12-9D
ata0 at pci0 slot 16
ee0: Autonegotiated, 100 Mbps full duplex
ata0: ACER M1543C
scsi0 at ata0 slot 0 rad 0
scsi1 at ata0 slot 1 rad 0
pci2 (primary bus:2) at nexus
aha_chim0 at pci2 slot 1
Adaptec AIC-7899 Adapter: H/W Rev 1, Driver Rev 2.274 CHIM V364A5
scsi2 at aha_chim0 slot 0 rad 0
aha_chim2 at pci2 slot 101
Adaptec AIC-7899 Adapter: H/W Rev 1, Driver Rev 2.274 CHIM V364A5
scsi3 at aha_chim2 slot 0 rad 0
#### bcm0: Link down ==> Link down to
other member #####
bcm0 at pci2 slot 5
bcm0: DEGXA-TA Gigabit Ethernet (LOM), hardware address: 00-02-A5-C6-10-80
pci1 (primary bus:1) at nexus
emx0 at pci1 slot 1
FCA-2354 : Driver Rev 2.10 : F/W Rev 3.91A1(1.20A0) : wwn
1000-0000-c938-439f
emx0: Using console topology setting of : Fabric
scsi4 at emx0 slot 0 rad 0
pci3 (primary bus:3) at nexus
pci4 (primary bus:3 subordinate bus:2) at pci3 slot 1
ee1 at pci4 slot 4
ee1: COMPAQ Intel 82559 (10/100 Mbps) Ethernet Interface
ee1: Driver Rev = V1.0.23, Chip Rev = 8, hardware address: 00-0B-CD-F4-ED-1A
ee1: Autonegotiated, 100 Mbps full duplex
ee2 at pci4 slot 5
ee2: COMPAQ Intel 82559 (10/100 Mbps) Ethernet Interface
ee2: Driver Rev = V1.0.23, Chip Rev = 8, hardware address: 00-0B-CD-F4-ED-1B
ee2: Autonegotiated, 100 Mbps full duplex
emx2 at pci3 slot 2
FCA-2354 : Driver Rev 2.10 : F/W Rev 3.91A1(1.20A0) : wwn
1000-0000-c938-43d1
emx2: Using console topology setting of : Fabric
scsi5 at emx2 slot 0 rad 0
Created FRU table binary error log packet kernel console: ace0
dli: configured
NetRAIN configured.
Random number generator configured.
rm_configure_callback: No valid MC adapter in the system TruCluster Server
V5.1B (Rev. 1029); 09/29/03 03:10 TNC kproc_creator_daemon: Initialized and
Ready
clubase: configured
Configuring RDG to use TCP
ics_hl: Configuring TCP as transport.
ics_ll_tcp: cluster network interface started: rendezvous port is 900
ics_tcp_init: Declaring this_node up 1
icsnet: configured
drd configured 0
drd_config_thread: Found 12 previously unknown local devices
kch: configured
dlm: configured
Starting CFS daemons
Registering CFS Services
Initializing CFSREC ICS Service
Registering CFSMSFS remote syscall interface Registering CMS Services CNX
MGR: cannot form: quorum disk is in use. Unable to establish contact with
members using disk.

Stéphane Moser
Direktion Informatik VBS
Rechenzentrum
Sektion Datenmanagement
Papiermühlestrasse 20, CH-3003 Bern
Tel: +41 31 323 4294 FAX +41 31 324 6721
mailto:stephane.moser@gs-vbs.admin.ch



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:00 EDT