Problem with sys_check V 133

From: LAWRIE SMITH (lawries@btinternet.com)
Date: Tue May 25 2004 - 08:43:39 EDT

• Next message: LAWRIE SMITH: "Network (tcp 9100) print problems"
• Previous message: Bryan Mills: "SNMP Mibs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Admins,

I have just downloaded and installed the latest
version of sys_check. When I run sys_check -all
-output, it runs for a few minutes and then gets
stopped with

[1] + Stopped(SIGTTIN) nohup sys_check -all
-output &

This leaves the following terminated processes,

    986476 pts/10 T < 0:00.83 sys_check -all
-output
    990521 pts/10 T < 0:00.08 sys_check -all
-output
    990526 pts/10 T < 0:00.00 sys_check -all
-output
    991166 pts/10 T < 0:00.00 /usr/bin/rsh
CH004-ics0 /sbin/consvar -g sys_serial_num
    991174 pts/10 T < 0:00.04 /usr/bin/rsh
CH004-ics0 /sbin/consvar -g sys_serial_num

It always stops in the same place.
System is a 4 node cluster (2 x ES40, 2 x ES45) with
dual MC interconnect (in failover) Tru64 V5.1B-1
(NHD7)

Any help or advice welcome.

TIA

Lawrie

• Next message: LAWRIE SMITH: "Network (tcp 9100) print problems"
• Previous message: Bryan Mills: "SNMP Mibs"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:59 EDT