From: Martin Roende Andersen (martin.roende@mail.dk)
Date: Sun May 23 2004 - 14:44:10 EDT
Hello all .-.
In a 5.1A cluster PK3. -
I have trouble on remote printers. Every now and then the prints get
queued, but does not get out on the printers until 5 or 10 minutes
later...
Can anyone tell me what goes wrong ?
( I suspect you might need to add an "rp:" value )
Also these two systems , has nr0 active with each their ee0 ee1 or ee2
ee3 pair configured for netrain. (could that cause the problems ? Any
experiences would be appreciated. )
The errors in lpr.log are :
Apr 15 18:41:23 ds1 lpd[525815]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_13
Apr 15 18:41:23 ds1 lpd[525818]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_36
Apr 15 18:46:10 ds1 lpd[525814]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_12
Apr 15 18:46:10 ds1 lpd[525820]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_45
Apr 15 18:46:10 ds1 lpd[525816]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_22
Apr 15 18:46:10 ds1 lpd[525825]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_120
Apr 15 18:46:10 ds1 lpd[525819]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_37
Apr 15 18:46:10 ds1 lpd[525824]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_67
Apr 15 18:46:10 ds1 lpd[525817]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_29
Apr 15 18:46:10 ds1 lpd[525815]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_13
Apr 15 18:46:10 ds1 lpd[525818]: INFO -- getport: connection refused --
will ret ry for up to 30 seconds, rhost ps_36
lp35|35:
:lf=/usr/adm/lp35err:
:lp=:
:rm=ps_35:
:rp=:
:sd=/usr/spool/lpd35:
lp36|36:
:lf=/usr/adm/lp36err:
:lp=:
:rm=ps_36:
:rp=:
:sd=/usr/spool/lpd36:
# Imaje mp4 Test
lp123|123:
:lf=/usr/adm/lp123err:
:lp=:
:rm=ps_120:
:rp=mp:
:sd=/usr/spool/lpd123:
Med venlig hilsen/ best regards
Martin Rønde Andersen reply mailto:martin.roende@mail.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:59 EDT