From: Bill Hall (billyboyhally@yahoo.com)
Date: Mon Apr 26 2004 - 21:56:16 EDT
I have a DS20 with a KZPAC 3 port RAID controller
which doesn’t support any disks greater than 18.2GB.
But this DS20 also has a KZPCM-DX adapter onto which I
have tried installing a 36.4GB drive (DS-RZ1FB-VW). At
the SRM console, “show device” returns dkb200 Compaq
BA03611C9B so the system is “seeing” the 36.4GB disk
but when I boot the machine the disk is not being
recognized so I cannot use/configure it.
OS is tru64unix 5.1a, firmware is latest 6.6
So my question is how do I get a DS20 to run the
36.4GB disk, if at all ?. Can I do it with the
existing hardware ?. Is there some other adapter I can
install which is compatible with both the 36.4Gb disk
and the DS20, such as the KZPCC-CE ?
Thanks for any assistance,
Bill Hall
Database Manager
Environmental Science Branch
Department of Environment and Conservation
Level 18, 59 Goulburn Street, Sydney
Tel: +61 2 9995 5491 Fax: +61 2 9995 5926
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:57 EDT