From: rob.leadbeater@lynx.co.uk
Date: Mon Apr 26 2004 - 02:54:30 EDT
Hi Managers,
A little while ago I posted the following query, regarding getting the
power supply status of a DS25 running 5.1B.
I had a variety of responses the most useful from Martin Roende Andersen
which advised to use the web interface of Insight Manager
(http://localhost:2301) to check things out.
However it would appear that in this case for whatever reason, the box
was misreporting. During some other maintenance work I had chance to do a
show power at the SRM which showed that one of the Power Supplies was
faulty, even though Insight Manager, and presumably the underlying SNMP
traps, were showing that the power system was OK and fault tolerant...
Hopefully when I get the replacement PSU from HP, I'll have chance to
figure out whats going on.
Cheers,
Rob
> -----Original Message-----
> From: rob.leadbeater@lynx.co.uk [mailto:rob.leadbeater@lynx.co.uk]
> Sent: 06 April 2004 11:14
> To: tru64-unix-managers@ornl.gov
> Subject: Getting power supply status
>
>
>
> Hi managers,
>
> Is there a command line I can use to get the current power
> supply status
> of a DS25 running 5.1B ?
>
> Cheers,
>
> Rb
>
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:57 EDT