From: HOMES Les (leshomes@energex.com.au)
Date: Wed Feb 18 2004 - 18:19:37 EST
tru64-unix-managers,
We have a PCI-VME adaptor in a DS20E, that is not working!
The only error that appears, is in the messages file.
The only difference between this node and other similiar nodes in our
system is a non-configurable kernel value in the vba subsystem is set to
DMA_Map_Status = 1 in this machine and set to 0 in the others.
Feb 19 07:45:40 prozac vmunix: Alpha boot: available memory from 0x2c56000
to 0x7fffc000
Feb 19 07:45:40 prozac vmunix: Digital UNIX V4.0G (Rev. 1530); Thu Feb 19
07:42:57 EST 2004
Feb 19 07:45:40 prozac vmunix: physical memory = 2048.00 megabytes.
Feb 19 07:45:40 prozac vmunix: available memory = 2002.93 megabytes.
Feb 19 07:45:40 prozac vmunix: using 7853 buffers containing 61.35 megabytes
of memory
Feb 19 07:45:40 prozac vmunix: Firmware revision: 6.3-1
Feb 19 07:45:40 prozac vmunix: PALcode: UNIX version 1.90-72
Feb 19 07:45:40 prozac vmunix: COMPAQ AlphaServer DS20E 666 MHz
Feb 19 07:45:40 prozac vmunix: pci1 at nexus
Feb 19 07:45:40 prozac vmunix: vba0: Digital PCI-VME Adapter Hardware rev =
N
Feb 19 07:45:40 prozac vmunix: vba0: Slave DMA Window size = 0x1000000 bytes
Feb 19 07:45:40 prozac vmunix: vba0: REM RAM Hi address = 0x41000000
Feb 19 07:45:40 prozac vmunix: vba0: REM RAM Lo address = 0x40000000
Feb 19 07:45:40 prozac vmunix: vba0 at pci1 slot 7 - dwpvc adapter, kit
version - 430
Feb 19 07:45:40 prozac vmunix: vba0: No Direct DMA window to perform DMA,
using HW Scatter gather
Feb 19 07:45:40 prozac vmunix: ---- sio probe -----
Feb 19 07:45:40 prozac vmunix: sio card 0 present
Feb 19 07:45:40 prozac vmunix: sio card 0 installed
Feb 19 07:45:40 prozac vmunix: sio0 at vba0 csr 0xfffffd021e000000 vme A24
user data mode
Feb 19 07:45:40 prozac vmunix: csr2 0xfffffd021e002000 vme A32 user data
mode
Feb 19 07:45:40 prozac vmunix: vec 0x40 priority 3
any clues?
Les Homes
SCADA Specialist
ENERGEX IT & T
mailto:leshomes@energex.com.au
Phone: (07) 3407 5173
Fax: (07) 3407 5162
Mobile: 0409 067 029
www.energex.com.au
*************************************************************************
This email message (including any file attachments transmitted with it)
is for the sole use of the intended recipient(s) and may contain
confidential and legally privileged information. Any unauthorised
review, use, alteration, disclosure or distribution of this email
(including any attachments) by an unintended recipient is prohibited.
If you have received this email in error, please notify the sender by
return email and destroy all copies of the original message.
Any confidential or legal professional privilege is not waived
or lost by any mistaken delivery of the email.
ENERGEX accepts no responsibility for the content of any email
which is sent by an employee which is of a personal nature.
*************************************************************************
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:51 EDT