No Graphics Console Driver Configured

From: Ryan, Terry (TRyan@idahopower.com)
Date: Wed Jan 21 2004 - 16:18:49 EST


Hello,
 
I have an ALPHA PWS 433AU personal workstation running tru64 UNIX v4.0f. I have installed the latest patch kit (DUV40FB22AS0008-20030730) and updated the firmware using the HP alpha systems firmware update v6.4 CD. The video cards are PowerStorm 4D10T Sn-PBXGK-AB. Initially I purchased this machine dual headed however I have since removed a video card to limit the troubleshooting. The following is what I am seeing after much fiddling with the box:
 
With the VGA enable jumper removed from the video card, the monitor receives no signal from the video card until the Digital login screen magically appears at which point I can login normally and everything seems ok.
 
With the VGA enable jumper installed on the video card the monitor receives a signal immediately and I see the boot process, however I get the message:
"comet0: Card type 'Digital 4D10T' with 8MB framebuffer memory" "comet0 at pci1000 slot 10" "No Graphics Console Driver Configured" "Generic Console Support Installed: _using VGA" during boot up. After booting up the machine gives the # prompt on a blue screen.

 I found the following comet driver entries:

./BINARY.comet.mod

./include/io/dec/ws/comet.h

./BOBN23/comet.h

./BOBN23/comet.mod

I believe I should be able to see the boot process and the subsequent Digital Unix Login screen as one seamless process. I know I do on other machines of this type.

Has anyone seen this before and if so how did you fix it?

Thank-you,

Sincerely

Terry Ryan
EMS Analyst
Idaho Power Co.
208-388-2821
tryan@idahopower.com

This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. A1.



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:49 EDT