From: Jim Kurtenbach (KurtenbachJ@crlcorp.com)
Date: Fri Jan 09 2004 - 11:15:08 EST
Greetings all!
I heard a rumor that for a tru64 cluster using hsg80s as shared storage, the
hw revision for the controllers must be E12 or better. Does anyone know if
this is true? Why?
Also, since we decommissioned some older hardware I have some working
hardware that isn't being used.
Qty - 4: hsz80 array controllers with 8.3 firmware cards (these are the scsi
interface version of the hsg80).
Qty - 2: hsg80 array controller rev e16 with 8.6F firmware cards and cache
modules with 512meg ram in each
No cables or manuals. All are working.
James Kurtenbach
MIS Department
Clinical Reference Laboratory
8433 Quivira
Lenexa, Kansas 66215
(913) 492-3652 x2508
kurtenbachj@crlcorp.com
DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying, or distribution of the message, or any
action or omission taken by you in reliance on it, is prohibited and may be
unlawful. Please immediately contact the sender if you have received this
message in error. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:47 EDT