From: Maaskant, Gert (gert.maaskant@centric.nl)
Date: Wed Nov 19 2003 - 07:40:38 EST
Thanks to all who reply'ed.
Smith, Lawrie [Lawrie.Smith@capita.co.uk]
Werner.Rost@zf.com
Lanier, John [john.lanier@hp.com]
Vincent, Jean-marc [jean-marc.vincent@hp.com]
Miguel Patrick [patrick.miguel@bpe-gruposantander.com]
Wakeman, Lindsay [Lindsay.Wakeman@bl.uk]
Brusche, Johan [johan.brusche@hp.com]
Frank Chu-Cheong [frank@digi-data.com]
Nemholt, Jesper Frank [jfn@hp.com]
Dr. Martin Körfer [koerfer@mpch-mainz.mpg.de]
Fred N. van Kempen [Fred.van.Kempen@microwalt.nl]
Pat OBrien [Pat.OBrien@choicepoint.com]
Kazuro FURUKAWA [kazuro.furukawa@kek.jp]
Iain Barker [ibarker@aastra.com]
Serino, Fred [Fred.Serino@escocorp.com]
Blair.Phillips@affa.gov.au
Kalle, Henk [Henk.Kalle@knmi.nl]
Steven Frost [Steven.Frost@powerco.co.nz]
********************** The ANSWER ****************************
Set on the P00>> (Boot prompt)
eaw0_mode = FastFD
Add this line in /etc/inet.local
/usr/sbin/lan_config -i ee0 -a 0 -s 100 -x 1
Thanks for your help.
Regards, Gert Maaskant
********************** ORIGINAL MESSAGE ****************************
Hi Managers,
We have a AlphaServer ES40 running version 5.1
The ethernet device is configured as auto-negotiate.
What I would do is to set the ethernet device ee0 to 100Mbps Full duplex.
The output from dia and ifconfig -a is included.
The question is, how do I change the specs of the device ?
Thanks,
Gert Maaskant
Centric IT Solutiuons.
Gouda The Netherlands.
*********************************************************************
Output van dia -R -o full | more
ee0 at pci1 slot 5
ee0: COMPAQ Intel 82559 (10/100 Mbps) Ethernet Interface
ee0: Driver Rev = V1.0.11, Chip Rev = 8, hardware address:
00-50-8B-69-C0-77
ee1 at pci1 slot 6
ee1: COMPAQ Intel 82559 (10/100 Mbps) Ethernet Interface
ee1: Driver Rev = V1.0.11, Chip Rev = 8, hardware address:
00-50-8B-69-BC-32
<Prompt> ifconfig -a
alt0: flags=c63<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,SIMPLEX>
inet 10.0.0.8 netmask ffffff00 broadcast 10.0.0.255 ipmtu 9000
ee0: flags=c63<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,SIMPLEX>
inet 194.104.94.188 netmask ffffff00 broadcast 194.104.94.255 ipmtu
1500
ee1: flags=c63<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,SIMPLEX>
lo0: flags=100c89<UP,LOOPBACK,NOARP,MULTICAST,SIMPLEX,NOCHECKSUM>
inet 127.0.0.1 netmask ff000000 ipmtu 4096
sl0: flags=10<POINTOPOINT>
tun0: flags=80<NOARP>
-------------------------------------
The information included in this message is personal and/or confidential and
intended exclusively for the addressees as stated. This message and/or the
accompanying documents may contain confidential information and should be
handled accordingly. If you are not the intended reader of this message, we
urgently request that you notify Centric immediately and that you delete
this e-mail and any copies of it from your system and destroy any printouts
immediately.
It is forbidden to distribute, reproduce, use or disclose the information in
this e-mail to third parties without obtaining prior permission from
Centric. We expressly point out that there are risks associated with the use
of e-mail. Centric and the companies within the group shall not accept any
liability whatsoever for damage resulting from the use of e-mail. Legally
binding obligations can only arise for Centric by means of a written
instrument, signed by an authorized representative of Centric.
-------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:44 EDT