From: Cohen, Andy (Andy.Cohen@cognex.com)
Date: Mon Nov 17 2003 - 14:20:20 EST
I just ran sys_check on a DS20E (5.1A). There were some strong words in the
output about LSM:
Operational: There are insufficient configuration copies in disk group
rootdg ( 2 ).
You must increase the number of configuration copies by adding more disks or
by re-adding disks that have active configuration areas. Check each disk in
voldg list rootdg. To correct the problem, use the following command,
setting privlen, nconfig, and nlog the same for all disks:
voldisksetup -i diskname privlen=nnn, nconfig=n nlog=n
Add the disk to LSM:
voldg -g rootdg adddisk diskname
Operational: There is an insufficient number of log copies in disk group
rootdg ( 2 ).
You must increase the number of log copies by adding more disks or by
re-adding disks with active configuration areas. Check each disk in voldg
list rootdg. To correct the problem, use the following command, setting
privlen, nconfig, and nlog the same on all disks:
voldisksetup -i diskname privlen=nnn, nconfig=n nlog=n
Add the disk to LSM:
voldg -g rootdg adddisk diskname
I know NOTHING about LSM -- I barely know what it stands for :-(). Can
somebody help me decipher these? Thanks so much!
Andy
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:44 EDT