From: true64@shore-lines.com
Date: Mon Nov 10 2003 - 16:29:34 EST
Thanks everyone for the advice with the BOOTP issue. I've got one other
little thorn in my side though...
I've recently tried to attach a Promise UltraTrak 4000 Raid array to my
Alpha VME 5/480 SBC. Still using Digital Unix 4.0D. The array comes up
in the SRM console correctly as "dka3" and even gives the details about
the raid array configuration when I do "show dev", but when I boot the
kernel it hangs and I get this error:
psiop0 at pci0 slot 2
Loading SIOP: script 406e9400, reg 320000, data 406f13d0
cam_logger: CAM_ERROR packet
cam_logger: bus 0 target 3 lun 0
ss_perform_timeout
timeout on disconnected request
It just repeats over and over. I've tried setting the array in JBOD,
RAID0, and RAID1 modes... all with no success. If anyone has any ideas
I'd love to hear them.
The promise array claims to be compatible with Ultra160 SCSI controllers,
and works with Windows, Linux, Macs, etc..
Thanks again,
Joseph
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:43 EDT