From: James Hammett (james@che.utexas.edu)
Date: Thu Oct 16 2003 - 11:19:01 EDT
Several people suggested that one of the options buried in the GUI
was to switch back to the text console. I eventually found it, I'll
paste the directions Travis Ostachuk sent me:
At 12:45 PM -0400 10/15/03, Osatchuk, Trevor wrote:
>1. After power up press F2 to enter setup
>2. Select CMOS setup
>3. Press F6 to enter advanced
>4. Tab to Console Selection
>5. Select Digital Unix Console (SRM)
>6. Press F10 key twice
>7. Press Enter
>8. Power Cycle.
Once I told did the power cycle the system booted up into Tru64
without any problems. (I think the GUI Console can't recognize UNIX
partitions, so that's why I though the HD had crashed).
thanks for the help,
James
-- -------------------------------------------------------------------------- James Hammett Users Services / Server and Lab Administration (SLAM) Information Technology Services ( (ITS) CPE 4.442 Chemical Engineering Unix Support 471-9701 ---------------------------------------------------------------------------- An injustice anywhere is a threat to justice everywhere - MLK jr. ----------------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:39 EDT