From: Browett, Darren (dbrowett@coquitlam.ca)
Date: Thu Oct 02 2003 - 10:54:31 EDT
Thank you to all that replied,
James Kurtenbach
Frank Chu-Cheong
Lucien HERCAUD
Henk Kelle
Michael Wheelock.
The problem lies with my unit offsets, and the fact that my HSG is in
transparent mode.
For transparent mode, the units 0-99 show on port1, and units 100-199
show on port2
as opposed to multi-path where units 0 to 199 show on both ports.
Therefore, for the system to see it, taking into account the unit
offset, the units should
be between 21 - 99 for port 1 and 121-199 for port 2.
Why the unit offsets ?, this HSG is currently shared with a Tru64 V4.0f
cluster, and I simply wanted
to separate the two enviroments, I think this is called selective
presentation. We also have another
SAN, that is a mix of Windows and Tru64, again we use unit offsets to
separate the two environements.
Darren
-----Original Message-----
From: Browett, Darren
Sent: Wednesday, October 01, 2003 3:54 PM
To: Tru64-Unix-Managers
Subject: TruCluster 5.1b/HSG80 Unit Offsets
Hi managers
I am putting together a test cluster, and I am having a problem adding a
device.
On the hsg80 the unit offsets are 20 and 120 for the cluster members.
The unit is named D101.
When I do a hwmgr -scan scsi then -show scsi/-view dev the device does
not show up.
Is this a problem with my offsets ?? I was under the impression (with
tru64 V5.x) that I would see all devices
above the assigned unit offsets.
Thank You
Darren
------------------------------------------------------------------------
--------------------------------------------------
Darren Browett P.Eng This
message was transmitted
Data Administrator using
100% recycled electrons
Information and Communication Technology
City of Coquitlam
P:(604)927 - 3614
E:dbrowett@coquitlam.ca
------------------------------------------------------------------------
---------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:37 EDT