From: Jean Marie Diaz (jdiaz@westcoastbeauty.com)
Date: Tue Sep 23 2003 - 11:44:48 EDT
We are testing an EMC (Clariion CX400) connected via two KGPSAs to an
AlphaServer 2100 running 4.0F patchlevel 8. The system sees two of the
three LUNs (not sure why it only sees two):
# file /dev/rrz17c
/dev/rrz17c: character special (8/33794) SCSI #2 RAID 5 disk #136 (SCSI
ID #1) (SCSI LUN #0) errors = 0/4
# file /dev/rrz8c
/dev/rrz8c: character special (8/16386) SCSI #1 RAID 5 disk #64 (SCSI ID
#0) (SCSI LUN #0) errors = 0/4
I have edited /etc/ddr.dbase, compiled and rebooted as per the EMC
documentation (also found in the archives here). I then zeroed the
disklabel, and wrote a default disklabel, which when read back shows (note
the negative number / overflow in the c partition definition):
# disklabel -r rz17
# /dev/rrz17a:
type: SCSI
disk: RAID 5
label:
flags: dynamic_geometry
bytes/sector: 512
sectors/track: 192
tracks/cylinder: 1
sectors/cylinder: 192
cylinders: 8684
sectors/unit: -1399230208
rpm: 4400
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize cpg] # NOTE:
values not exact
a: 131072 0 unused 0 0 # (Cyl.
0 - 682*)
b: 262144 131072 unused 0 0 # (Cyl.
682*- 2047)
c: -1399230208 0 unused 0 0 # (Cyl.
0 - 15081963)
d: 0 0 unused 0 0 # (Cyl.
0 - -1)
e: 0 0 unused 0 0 # (Cyl.
0 - -1)
f: 0 0 unused 0 0 # (Cyl.
0 - -1)
g: 1447671936 393216 unused 0 0 # (Cyl.
2048 - 7542005)
h: 1447671936 1448065152 unused 0 0 # (Cyl.
7542006 - 15081963)
Creating an AdvFS file domain with the c partition then fails:
# mkfdmn /dev/rz17c mirrortest
mkfdmn: can't get device size; can't figure out file system partition
mkfdmn: can't create new domain 'mirrortest'
Is there some sysconfigtab variable or other bit of configuration that needs
to be set in order for disklabel to properly size the partition? We do want
to upgrade to 5.1B, but would rather get this working as is (our production
hosts are all at 4.0F).
For extra credit, can anyone suggest a reason why we would only see 2 of the
3 LUNs defined on the EMC?
Thanks in advance,
Ambar
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:36 EDT