From: Parkin Frank - fparki (fparki@acxiom.co.uk)
Date: Fri Sep 12 2003 - 08:33:39 EDT
Original Post:
Trying to roll the cluster to v5.1b.
After running "clu_upgrade setup 1" I get the following message...
*** Error ***
A cluster upgrade requires that the '/var' file system have '237387718'
blocks of
available space. You currently have '17932432' blocks of available space and
need an additional '219455286' blocks of disk space before the upgrade can
proceed. Increase the available disk space and rerun this stage of the
upgrade.
I find it difficult to believe that /var requires ~120Gb of disk space.
Any comments?
Summary:
The majority of the responses advise that the space requirement was mb and
not gb. Unfortunately, these were incorrect.
Kudos to Johan Brusche with this response.
"The upgrade wants to make a backuo-tar of all member-specific files, ie
mostly config files. BUT, if you mount a local only filesystem onto a
mountpoint that is a CDSL, then also that whole filesystem is counted
towards the space required for that tar-file. So unmount any filesystem
mounted on this member's CDSL's and redo the setup."
We had a couple of CDSL mounted file-systems that were being considered for
the upgrade sizing process.
Thanks
Frank
**********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:35 EDT