ddr.dbase entry for IBM ULTRIUM-TD2 (5.1a)

From: Mike Broderick (broderic@MIT.EDU)
Date: Thu Jul 31 2003 - 12:13:01 EDT

• Next message: David Dustan: "Summary: Source Command in Linux bash = ? in Tru64"
• Previous message: Derek Gatherer: "desktop login problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

We just purchased an ATL w/ IBM Ultrium-TD2 (LTO2) drives. I need to
put an entry in /etc/ddr.dbase on our 5.1A systems so the compression
devices (e.g., tapeX_d1) work as before. I see no "lto" entry in the
current file to clone. I assume I can cut/paste the DENSITY entries but
am unsure what to put for the PARAMETERS entry. E.g., For the DLT7000
we currently use, we have this:

 PARAMETERS:
        TypeSubClass = tk
        TagQueueDepth = 0
        MaxTransferSize = 0x0ffffff # (16MB - 1)
        ReadyTimeSeconds = 120 # seconds

Any one else use these drives and can answer this?

Thanks.

                                                                        
                                            _Mike

• Next message: David Dustan: "Summary: Source Command in Linux bash = ? in Tru64"
• Previous message: Derek Gatherer: "desktop login problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:29 EDT