From: Iain Barker (yoshac@hotmail.com)
Date: Mon Jul 28 2003 - 17:54:03 EDT
Hi Managers,
I am looking for some cables to connect RS232 terminal and RS232 printer on
the same wire. This is actually for connecting two VT520 sessions via one
connector to a system which has a single DB25.
This uses the DB25 connector for primary TX/RX (terminal) and the secondary
TX/RX (printer) on one end of the cable, and has two MMJ connectors one for
each TX/RX on the other end for the VT520 ports.
i.e.
MMJ1 to 25D-F (primary connection)
2 TX to 2 TX1
5 RX to 3 RX1
3+4 SG to 7 SG
MMJ1 to 25D-F (secondary connection)
2 TX to 14 TX2
5 RX to 16 RX2
3+4SG to 7 SG
Does anyone have an idea for a supplier of this type of RS232 splitter
cable?
I need a quantity of these, otherwise I would just solder one up myself.
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:28 EDT