From: Jim Kurtenbach (KurtenbachJ@crlcorp.com)
Date: Wed Jul 23 2003 - 14:30:28 EDT
Greetings all,
I'd like to run Linux 8.0, Tru64 4.0g, and Openvms cluster 7.2.1 on the same
SAN. This SAN is currently running, but with only Openvms on it.
Even though the SAN is homogenous, I limit access to units by using
selective storage presentation.
(hsg801>set d1 dis=all enable=(ovms1,ovms2,ovms3,ovms4)
The documentation matrix mentions that I should enable zoning on the
switches, something I've never done before.
The Question:
Why do I need to create zones on the switches if the HSG can limit the units
per OS by using selective storage presentation?
Thanks in advance!!
James Kurtenbach
MIS Department
Clinical Reference Laboratory
8433 Quivira
Lenexa, Kansas 66215
(913) 492-3652 x2508
kurtenbachj@crlcorp.com <mailto:kurtenbach@crlcorp.com>
DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying, or distribution of the message, or any
action or omission taken by you in reliance on it, is prohibited and may be
unlawful. Please immediately contact the sender if you have received this
message in error. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:28 EDT