From: Ken Kleiner (adkleiner@adelphia.net)
Date: Fri Jun 13 2003 - 16:46:23 EDT
Ken Kleiner wrote:
This problem has finally been resolved - thanks to all who helped and
offered advice.
The end result was a faulty motherboard - which was swapped out along
with a power control
module and bridge control module. I had to update the firmware and run
the ECU configuration
utility once that was done to get by a kernel panic.
Have a nice weekend!
-Ken
> Hi...
>
> I have a AlphaServer 4100 that crashed overnight. I did
> a hard reset. The system poweron lights appear, along with a
> backlit lcd display. BUT - the system is NOT booting and the
> lcd readout does not show anything.
>
> I have called service to come out, but wanted to see if anybody
> has seen this or can give advice...thanks...
>
> -Ken Kleiner
> System Manager
> Umass Lowell
>
>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:23 EDT