DS20 - KZPAC (NEW CARD) WIILL NOT POLL OR HALT

From: Jane Caldwell-Myers (jane@nickel.laurentian.ca)
Date: Thu Jun 05 2003 - 11:44:15 EDT

• Next message: John Deacon: "odd DLT problem"
• Previous message: lawries@btinternet.com: "TCP Socket performance tuneing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Part 2 of my dilema.

As suggested (I will summarize at a lter date) I removed the card and the machine came up - this would indicate a bad controller card. I got a replacement card (identical) and same errors occur when I boot.
The system will not HALT and I get a 'waiting for dra.... to poll" on the monitor.

Would this indicate a completely broken DS20?

Thanks again
Jane

Jane Caldwell-Myers
Laurentian University
705 675-1151 Ext. 2150
jane@laurentian.ca

• Next message: John Deacon: "odd DLT problem"
• Previous message: lawries@btinternet.com: "TCP Socket performance tuneing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:21 EDT