From: Kjell Andresen (kjell.andresen@usit.uio.no)
Date: Mon Jun 02 2003 - 05:25:34 EDT
Dr Thomas.Blinn@HP.com" <tpb@doctor.zk3.dec.com> send me an update on
the matter saying:
"My colleagues inform me that in fact the KZPAC is supposed to be
officially supported in V5.1B, so you should be able to use it
with confidence."
For us using such an old product it's important to know if it will work
or no. Who is paying for hw-support on such old items?
This list and all you here are irreplaceable. Thank you.
Regards,
Kjell Andresen Systems administrator, University of Oslo, Norway
Center for Information Technology Services and
Department of Geophysics
---------- Forwarded message ----------
Kjell Andresen <kjell.andresen@usit.uio.no> writes:
> I read http://www.darklab.net/resources/tru64/1034.html:
>
> "The consensus: yes it works (because the driver is still present in the
> OS) however its not supported."
>
> I've been running an AS400 with a kzpac(-ca) for some time with v5.1a
> and want to upgrade to v5.1b
>
> Do you know whether or not the driver is still present?
[ Tom'¨s messages removed ]
It works:
harald /# hwmgr -view hierarchy|more
..
35: swxcr_controller xcr0
36: control_port xcr0 scp0
37: disk ctlr-0-unit-0 dsk0
38: disk ctlr-0-unit-1 dsk1
Tested commands so far:
showfdmn -k raid
showfsets -k raid
du -sk /mn/harald/u4/*
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:20 EDT