From: Jenny Butler (jbutler@utmem.edu)
Date: Thu May 29 2003 - 11:11:59 EDT
I have actually a two-node TruCluster - v5.1PK3. I needed to add space
to the /usr (cluster_usr filedomain) so I added a 9Gb disk and wrote a
disklabel. Then I did addvol /dev/disk/dsk21g cluster_usr and balance
on cluster_usr - success. I then tried to addvol /dev/disk/dsk21h to
cluster_var and get this error:
addvol /dev/disk/dsk21h cluster_var
addvol: can't get device size; can't figure out file system partition; I/O
error
addvol: Can't add volume '/dev/disk/dsk21h' to domain 'cluster_var'
The disklabel is:
# /dev/rdisk/dsk21c:
type: SCSI
disk: BB00911C
label:
flags: dynamic_geometry
bytes/sector: 512
sectors/track: 168
tracks/cylinder: 20
sectors/cylinder: 3360
cylinders: 5273
sectors/unit: 17773524
rpm: 7207
interleave: 1
trackskew: 48
cylinderskew: 52
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype fsize bsize cpg # ~Cyl values
a: 2101573 0 unused 0 0 # 0 -
625*
b: 262144 131072 unused 0 0 # 39*-
117*
c: 17773524 0 unused 0 0 # 0 -
5289*
d: 0 0 unused 0 0 # 0 - 0
e: 0 0 unused 0 0 # 0 - 0
f: 0 0 unused 0 0 # 0 - 0
g: 13542032 2101573 AdvFS # 625*-
4655*
h: 2129919 15643605 unused 0 0 # 4655*-
5289*
I cannot find this error. Can someone please help?
Thanks, Jenny
jbutler@utmem.edu
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:20 EDT