From: Kjell Andresen (kjell.andresen@usit.uio.no)
Date: Thu May 29 2003 - 09:42:58 EDT
Kjell Andresen <kjell.andresen@usit.uio.no> writes:
> I read http://www.darklab.net/resources/tru64/1034.html:
>
> "The consensus: yes it works (because the driver is still present in the
> OS) however its not supported."
>
> I've been running an AS400 with a kzpac(-ca) for some time with v5.1a
> and want to upgrade to v5.1b
>
> Do you know whether or not the driver is still present?
Thanks to "Dr Thomas.Blinn@HP.com" <tpb@doctor.zk3.dec.com>:
It would have been a significant engineering project to remove the
driver from the software; no one did it. It probably just works.
But it is no longer supported, if there were a problem, no one can
get it fixed because there is no longer an engineering group that
is responsible for such fixes. (If the problem was clearly in the
general software infrastructure and could impact other devices, it
would probably get fixed, but if it's specific to that hardware, or
it's a firmware problem in the hardware, it will never get fixed.)
It works:
harald /# hwmgr -view hierarchy|more
..
35: swxcr_controller xcr0
36: control_port xcr0 scp0
37: disk ctlr-0-unit-0 dsk0
38: disk ctlr-0-unit-1 dsk1
Tested commands so far:
showfdmn -k raid
showfsets -k raid
du -sk /mn/harald/u4/*
Regards,
Kjell Andresen Systems administrator, University of Oslo, Norway
Center for Information Technology Services and
Department of Geophysics
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:20 EDT