From: Dr. David Kirkby (davek@medphys.ucl.ac.uk)
Date: Thu May 29 2003 - 07:31:11 EDT
I have a Dec Personal Workstation 600a (600 MHz CPU) running Tru64 5.1B.
Is it possible to power off the machine, without physically touching the
power switch? Suns, including some old ones with CPUs as slow as 40 MHz
have a 'poweroff' command which will remove all power to the machine
once the machine is shut down, but I don't seem to discovered anything
under Tru64 to do this.
-- PLEASE NOTE: If this message was sent to a newsgroup or mailing list, please reply to there. Personal e-mail is always welcome, but unless I have received e-mail from you previously, you may be sent an automatically generated reply, requesting that you send the message again, adding a password in the subject line. Sorry, but this action has been taken to prevent unsolicited commercial emails (spam mail). Dr. David Kirkby PhD, Senior Research Fellow, Department of Medical Physics, University College London, 11-20 Capper St, London, WC1E 6JA. Tel: 020 7679 6408 Fax: 020 7679 6269 Internal telephone: ext 46408 e-mail davek@medphys.ucl.ac.uk Web page: http://www.medphys.ucl.ac.uk/~davek
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:20 EDT