From: Padiyath Kumar (Kumar.Padiyath@psi.ch)
Date: Wed May 21 2003 - 02:42:54 EDT
Hallo,
I got number of replies. But every one mentioned about booting
with genvmunix. I have upgeaded the Firmware
SRM CONSOLE V7.2-2
In my previous enquiry I had forgotten to mention very important point.
Sorry for that. Tom remind me about this point. Thanks.
The point is: I donot see the card in SRM console.(sho dev) I have the
old card for FDDI still
in the machine. I see that card. I cannot remove this
card since there
is a SCSI connection is on this board. I use the slot
9. (32 bit connection) for
the new card.
Previous Question:
==============
"Hallo,
I want to replace the FDDI card with a 10/100 mb card (3X-DE600-AA)
in an AlphaStation. I donot see the card when I inserted it.
Can I use this card in this machine?"
regards and thanks in advance,
Sreekumar
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:19 EDT