From: Antonio Gonzalez (antonio.gonzalez@teleline.es)
Date: Mon May 19 2003 - 19:52:06 EDT
After looking at the archives ... can't find any solution.
My configuration is
Turbolaser just upgraded to v5.1B from 4.0D; 4 HSZ50 HSOF 5.7Z-0
One pair works OK but the other don't. The LUNs got translated to paths to a
single unit and Advfs got corrupted.
I thought that whith this HSOF the units shall get a correct name from the
HSZ but ...
Controller:
HSZ50-AX ZG73536136 Firmware V57Z-0, Hardware A02
Configured for dual-redundancy with ZG73536139
In dual-redundant configuration
SCSI address 7
Time: NOT SET
Host port:
SCSI target(s) (0, 1, 2, 3), Preferred target(s) (0, 1)
TRANSFER_RATE_REQUESTED = 10MHZ
both pair are identical.
In scu ...
CAM Equipment Device Table (EDT) Information:
Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision
N/W
-------------- ----------- ------ --------- ---------------- -------- --
-
0 0 0 Changer SCSI-2 DEC TL810 (C) DEC 1.25 N
0 2 0 Sequential SCSI-2 DEC TZ89 (C) DEC 2561 W
1 3 0 Sequential SCSI-2 DEC TZ89 (C) DEC 2561 W
2 0 2 Direct SCSI-2M-^^S HSZ50-AX V57Z
W
2 1 0 Direct SCSI-2M-^^S HSZ50-AX V57Z
W
2 1 1 Direct SCSI-2M-^^S HSZ50-AX V57Z
W
2 2 0 Direct SCSI-2M-^^S HSZ50-AX V57Z
W
3 4 0 CD-ROM SCSI-2 DEC RRD46 (C) DEC 0557 N
4 4 0 Sequential SCSI-2 DEC TZ89 (C) DEC 2561 W
5 5 0 Sequential SCSI-2 DEC TZ89 (C) DEC 2561 W
6 0 0 Direct SCSI-2 DEC HSZ50-AX V57Z W
6 0 1 Direct SCSI-2 DEC HSZ50-AX V57Z W
6 0 2 Direct SCSI-2 DEC HSZ50-AX V57Z W
6 0 3 Direct SCSI-2 DEC HSZ50-AX V57Z W
The vendor-id field is wrong for the first 4 HSZ50 scsi disks !!
At the console the problem is the same:
polling for units on kzpsa2, slot 10, bus 0, hose0...
pkc.7.0.10.0 pkc TPwr 1 Fast 1 Bus ID 7 P01 A11
dkc0.0.0.10.0 DKC0 ^ V57Z
dkc1.0.0.10.0 DKC1 ^ V57Z
dkc2.0.0.10.0 DKC2 ^ V57Z
dkc100.1.0.10.0 DKC100 ^ V57Z
instead of ...
polling for units on kzpsa5, slot 8, bus 0, hose1...
pkg.7.0.8.1 pkg TPwr 1 Fast 1 Bus ID 7 R01 A11
dkg0.0.0.8.1 DKG0 HSZ50-AX V57Z
dkg1.0.0.8.1 DKG1 HSZ50-AX V57Z
dkg2.0.0.8.1 DKG2 HSZ50-AX V57Z
for the other pair.
Could I try to assign a custom name by doing? :
# hwmgr edit scsi -did x -uwwid "DISK-HSZ50n-xx"
one after the other and provide the disks the unique name they need ??
As you can imagin we have the system down waiting for a bright idea from any
of you :-)
Thanks a lot
Antonio González Ortiz
E-Mail: Antonio.Gonzalez@teleline.es
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:19 EDT