Access to device on SAN

From: Xavier (xavier@rootshell.be)
Date: Thu May 15 2003 - 08:01:19 EDT

• Next message: Dewhurst, Cy: "FTP service in TruCluster 5.1"
• Previous message: Greg Rudd: "Correction: Io saturation problems with hsg80"
• Next in thread: Xavier Mertens: "[Summary] Access to device on SAN"
• Reply: Xavier Mertens: "[Summary] Access to device on SAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Gurus,

I run a Tru64 cluster with 2 HSG80.
A few days ago, I added some disks to the system via the HSG interface.
I performed a "hwmgr -show scsi -cat scsi_bus". On one cluster node, the
device was badly detected:

        SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST
 HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID PATH
-------------------------------------------------------------------------
[...]
  343: 58 osborne disk none 0 4 (null) [2/1/32]
                                                          ^^^^^^
(instead of dsk52)

Any idea how to fix this? In the same time, we detected bad performance on
the whole system...

Regards,
Xavier

--
http://www.rootshell.be
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sb20293A2058554E494Csnlbxq'|dc

• Next message: Dewhurst, Cy: "FTP service in TruCluster 5.1"
• Previous message: Greg Rudd: "Correction: Io saturation problems with hsg80"
• Next in thread: Xavier Mertens: "[Summary] Access to device on SAN"
• Reply: Xavier Mertens: "[Summary] Access to device on SAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:18 EDT