From: Harihar Krishnan (harik@bma.gov.bh)
Date: Thu Mar 27 2003 - 01:20:41 EST
Thanks to Olle Eriksson, Bryan Lavelle, Tom Webster and
especially Peter Gergen, I found that tcopy works absolutely fine. The
command I used is:
tcopy /dev/tape/tape0_d0 /dev/tape/tape1_d0
Thanks also to those who recommended "dd", but I did not
have to attempt that.
--------------------------
Original Problem:
Dear Experts,
We have a 2-node cluster with a similar tape drive on each.
As I can see both tapes drives from any of the nodes and I use "vdump" to do
backup, is there any command I can use to copy the "vdump" backup done on of
the tapes onto a tape on the other node's tape drive (effectively a
tape-to-tape image copy between tapes on each node)?
Would appreciate a prompt response. Thanks in advance.
Harihar K
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:13 EDT