Serial Port

From: Dege, Robert C (RDege@northropgrumman.com)
Date: Tue Mar 18 2003 - 18:34:38 EST

• Next message: Marc Schlensog: "Advice regarding Powerstorm 4D60T"
• Previous message: Jeffrey_Hummel@albemarle.com: "Tools for monitoring Network Utilization"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have a RAID5 Controller that I'm trying to communicate with via kermit on
TRU64 5.1A (no Patch Kits).

I am able to see /dev/tty00 & /dev/tty01 (COM1 & COM2 respectively), but
when I try to access the RAID unit via kermit from either port, I am unable
to communicate with it. I was able to when I used a Windows box, so I know
that the problem is on the UNIX end.

My kermit paramters:

set line /dev/tty00
set speed 9600
set serial 8N1
set carrier-watch off

I haven't done anything to the system to configure the COM Ports, and the
SRM lists them as enabled.

Any assistance is appreciated.

-Rob

• Next message: Marc Schlensog: "Advice regarding Powerstorm 4D60T"
• Previous message: Jeffrey_Hummel@albemarle.com: "Tools for monitoring Network Utilization"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:12 EDT