From: Adam.Bentley@eme.co.uk
Date: Thu Mar 06 2003 - 08:34:19 EST
Hi
I've got a number of Alpha boxes which have just had BMC Patrol v 3.4.11
(KM version 804) installed. All seems to work fine except that for some reason
inside UnixOS->KERNEL one the reported values for KERFileUsedPercent always
shows 100%. I'm guessing whatever its measuring is not the right thing for
Tru64. I'm running 4.0f (NHD3) on ES40's and DS20e's.
If anyone has any comments about configuring Patrol on Tru64 I'd welcome them.
It would be nice to know how to tweak this value/reading to show something
useful...
I should stress I am no BMC expert, I've just done a few installations.
many thanks...
Adam.
___________________________ Disclaimer Notice __________________________
This message and any attachments are confidential and should only be read
by those to whom they are addressed. If you are not the intended recipient,
please contact us, delete the message from your computer and destroy any
copies. Any distribution or copying without our prior permission is
prohibited.
Internet communications are not always secure and therefore the Powergen
Group does not accept legal responsibility for this message. The recipient
is responsible for verifying its authenticity before acting on the
contents. Any views or opinions presented are solely those of the author
and do not necessarily represent those of the Powergen Group.
Registered address:
East Midlands Electricity Distribution plc,
Westwood Way, Westwood Business Park, Coventry, CV4 8LG
Registered in England & Wales No. 2366923.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:10 EDT