From: Brehl, Blake (Blake.Brehl@anritsu.com)
Date: Wed Feb 19 2003 - 11:57:13 EST
Hello All,
I regretfully cut and pasted Johan's reply incorrectly.
/MAKEDEV tzN should be ./MAKEDEV tzN
Best Regards, Blake
>Hello All!
>
>13 quick replies and even a script from Alan Davis. Below is
>Johan Brusche's reply:
>
>cd /dev
>/MAKEDEV tzN <<<--- where N=(scsi-bus-nbr*8+tape-target-nmbr)
> eg tz5 if drive is on bus #0 target#5
> use "/sbin/scu sho edt" if you do not
>know the numbers.
>
>I didn't get to try the scu command in the environment of
>being booted off of cdrom exit to O/S shell. Turns out the
>device was tz0. I figure it's a good idea to have a printed
>copy of "uerf -R -r 300" around.
>
>Best Regards,
>
>Blake Brehl
>Sr. DBA
>Anritsu Company United States
>Morgan Hill, CA
>
>
>
>>I have a corrupt advfs usr_domain, won't respond ot verify -f,
>>or -F (E_DOMAIN_NOT_ACTIVATED (-1067)). I knocked a power
>>cord, turned off the SBB's, did ra200rcu make optimals. I'm
>>looking at restoring from tape.
>>
>>When I boot off of cdrom, install and exit to O/S, is there a
>>command similar to the 5.? version for creating the tape
>>devices? I want to create /dev/nrmt0h.
>
This message is intended for the use of the individual/entity to whom it is addressed. This message may contain privileged information exempt from disclosure. If you are not the addressee, distribution or copying of this message, or dissemination of the information contained herein is strictly prohibited. If you should receive this message in error, please destroy it, or return to sender, Thank You
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:08 EDT