From: tpwise@lancasterlabs.com
Date: Sun Feb 02 2003 - 11:03:03 EST
I'm having problems with my Alpha 4100 correctly seeing devices on an SW500
Storage works disk cabinet.
When you do show devices at the SRM console the device names are mangled and
booting to UNIX the devices are not see at all.
I've gone through four HSZ50 controllers trying to fix the problem.
I've replaced the SCSI cables and terminators.
I've tried different termination on the KZPSA controller.
I've tried single controller, dual redundant.
I've tried deleting the units and drive and remaking them.
I've changed the SCSI ID of the KZPSA.
This is a regular problem I've run into with this equipment and I've been
able to fix it by replacing the HSZ50 controller of KZPSA and help would be
appreciated. I'm out of idea's.
Tom Wise,
x1586
Principal Specialist
Lancaster Labs.
CONFIDENTIAL MATERIAL: This message is intended only for the use of the
individual or entity to which it is addressed and may contain information
that is privileged, confidential, and exempt from disclosure under
applicable law. If received in error, please notify sender by return e-mail
and destroy all copies of the original transmission and any attachments.
Thank you. If you wish to view information about Lancaster Laboratories,
Inc., please visit our website at www.lancasterlabs.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:06 EDT