From: Padiyath Kumar (Kumar.Padiyath@psi.ch)
Date: Mon Jan 27 2003 - 08:16:28 EST
Hello,
Iam running AFS 3.6 client on a number of Tru64 machines having 1-3
CPU's.
To name some of the machines architecture: AlphaServer 4100, AlphaServer
1200, Personal WS 600au
DIGITAL Ultimate Workstation 533au2. On all the machines the AFS client
SW works without
any problem except the Ultimate WS 533au. This machine is having 2CPU's.
I have installed the
Tru64 Patch level 2 on all the machines. Iam running LSF SW also on this
Ultimate WS .
This Ultimate WS crashes very often with a CPU panic error: I have
started the AFS SW
on CPU 0 and on CPU 1 without success. (runon command used). If I run
the system
without afs then the system is not crashing.Since the size of the
crash-data file is 32 Kb, Iam just
giving part of the error. I have copied the crash-data to our anonymous
server(ftp.psi.ch,
directory : /PSI_outgoing/kumar)
Iam enclosing the crash-data.0 file from the /varadm/crash directory.Has
anyone noticed this problem?
I must say that I donot have no problems with other Tru64 machines.
Thanks in advance and with regards,
Kumar
#
# Crash Data Collection (Version 1.4)
#
_crash_data_collection_time: Fri Jan 24 18:40:58 MET 2003
_current_directory: /
_crash_kernel: /var/adm/crash/vmunix.0
_crash_core: /var/adm/crash/vmzcore.0
_crash_arch: alpha
_crash_os: Compaq Tru64 UNIX
_host_version: V5.1A (Rev. 1885)
Compaq Tru64 UNIX V5.1A (Rev. 1885); Mon Dec 2 07:48:55 MET 2002
_crash_version: V5.1A (Rev. 1885)
Compaq Tru64 UNIX V5.1A (Rev. 1885); Mon Dec 2 07:48:55 MET 2002
warning: Files compiled -g3: parameter values probably wrong
_crashtime: struct {
tv_sec = 1043429867
tv_usec = 183998
}
_boottime: struct {
tv_sec = 1043108055
tv_usec = 251266
}
_config: struct {
sysname = "OSF1"
nodename = "psuf1.psi.ch"
release = "V5.1"
version = "1885"
machine = "alpha"
}
_cpu: 49
_system_string: 0xffffffffffdfcff8 = "DIGITAL Ultimate Workstation 533au2"
_ncpus: 2
_avail_cpus: 2
_partial_dump: 1
_physmem(MBytes): 1791
_panic_string: 0xfffffc000099a9e8 = "resettodr: cpu not master"
_paniccpu: 1
_panic_thread: 0xfffffc0020e99500
_preserved_message_buffer_begin:
struct {
hdr = struct {
msg_magic = 0x880524
msg_bufx = 0xd33
msg_bufr = 0xcf4
msg_size = 0xffe0
}
msg_bufc = "Alpha boot: available memory from 0x16ca000 to 0x6fffa000
Compaq Tru64 UNIX V5.1A (Rev. 1885); Mon Dec 2 07:48:55 MET 2002
physical memory = 1024.00 megabytes.
available memory = 989.35 megabytes.
using 3879 buffers containing 30.30 megabytes of memory
Master cpu at slot 0
Starting secondary cpu 1
Firmware revision: 6.0
PALcode: UNIX version 1.23
DIGITAL Ultimate Workstation 533au2
pci1 (primary bus:1) at mcbus0 slot 5
Loading SIOP: script c0000000, reg 7fdee00, data c000a000
scsi0 at psiop0 slot 0 rad 0
isp0 at pci1 slot 2
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded by console)
isp0: Fast RAM timing enabled.
scsi1 at isp0 slot 0 rad 0
fta0 DEC DEFPA FDDI Module, Hardware Revision 1
fta0 at pci1 slot 3
fta0: DEC DEFPA (PDQ) FDDI Interface, Hardware address: 00-00-F8-C8-AE-D1
fta0: Firmware rev: 3.20
pci0 (primary bus:0) at mcbus0 slot 4
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
gpc0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
tga0 at pci0 slot 2
tga0: depth 8, map size 2MB, 1280x1024
tga0: ZLXp2-E, Revision: 34
tu0: DECchip 21140: Revision: 2.0
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address:
00-00-F8-1F-4B-33
tu0: auto negotiation on: will advertise 100BaseTX (UTP) port: full duplex
Created FRU table binary error log packet
kernel console: ace0
i2c: Server Management Hardware Present
dli: configured
NetRAIN configured.
ATM Subsystem configured with 2 restart threads
afs: setting clock ahead 2 seconds (via 129.129.190.23 in cell psi.ch).
panic (cpu 1): resettodr: cpu not master
.
.
.
.
.
.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:05 EDT