From: rob.leadbeater@lynx.co.uk
Date: Wed Jan 22 2003 - 09:26:39 EST
Hi,
Thanks to Pat O'Brien and Peter Gergen for their responses on the query
below.
The most pertinent advise came from Pat who from bitter experience,
advised to wait until the kit arrived and take a look !
On receiving the kit this morning I can confirm that the H7600-DB is
fitted with a 16 Amp IEC 309 plug.
However on the basis that HP Support could not answer this question I
guess that there may be regional variations, so YMMV !!
Cheers,
Rob
-----Original Message-----
From: rob.leadbeater@lynx.co.uk [SMTP:rob.leadbeater@lynx.co.uk]
Sent: Monday, January 13, 2003 2:24 PM
To: tru64-unix-managers@ornl.gov
Subject: Power input lead
Hi admins,
I'm awaiting delivery of a couple of new DS25's and a new rack.
I believe the rack is going to contain 2 x H7600-DB PDU's.
Flicking through the quickspec's for the rack shows that these PDU's have
an IEC 309 power plug, however none of the specs I've found tell me
whether this is a 16 or 32 Amp plug.
I'm thinking they are probably going to be 16A plugs, however some of the
specs list the H7600-DB as a 20 Amp model which is a bit confusing.
Could someone enlighten please...
Cheers,
Rob
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:04 EDT