From: rob.leadbeater@lynx.co.uk
Date: Mon Jan 13 2003 - 09:22:46 EST
Hi admins,
I'm awaiting delivery of a couple of new DS25's and a new rack.
I believe the rack is going to contain 2 x H7600-DB PDU's.
Flicking through the quickspec's for the rack shows that these PDU's have
an IEC 309 power plug, however none of the specs I've found tell me
whether this is a 16 or 32 Amp plug.
I'm thinking they are probably going to be 16A plugs, however some of the
specs list the H7600-DB as a 20 Amp model which is a bit confusing.
Could someone enlighten please...
Cheers,
Rob
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:03 EDT