From: Blair.Phillips@affa.gov.au
Date: Sun Jan 05 2003 - 19:49:53 EST
I am having problems getting the SWCC client GUI for the KZPCC controller to work.
I can get access to the controller as evidenced by seeing the firmware version displayed in the
"Properties" info box, but any attempt to open the Storage window results in the message:
The KZPCC client failed to connect to system raptor.abare.gov.au. gethostbyaddr call for system with IP
address 169.254.168.211 received error of : HOST NOT FOUND
I have no idea where the address 169.254.168.211 comes from. Both the client and the agent systems
are on 10.x.x.x addresses and the local DNS has no knowledge of 169.254.168.211
The client and agent systems are each entered into the other's /etc/host files to remove any DNS funnies.
KZPCCinfo (from sys_check) returns:
KZPCC Controller Information Utility V2.3.1.040
Copyright (c)1999 by Compaq Computer Corporation, all rights reserved.
The ld_tid is 532 & the itr_name is I2O Block Storage-iop-0-dev-0The tid specified was found
The ld_tid is 533 & the itr_name is I2O Block Storage-iop-0-dev-0The ld_tid is 533 & the itr_name is I2O Block Storage-iop-0-dev-1The tid specified was found
The ld_tid is 534 & the itr_name is I2O Block Storage-iop-0-dev-0The ld_tid is 534 & the itr_name is I2O Block Storage-iop-0-dev-1The ld_tid is 534 & the itr_name is I2O Block Storage-iop-0-dev-2The tid specified was found
No controller information found.
#
Anyone else seen this, or have any ideas what may be going on?
Environment:
AlphaServer ES45, Tru64 v5.1A pk3 with security patches
KCPCC-EC firmware CQ16
SWCC/KZPCC v2.3
Thanks for any help.
Blair Phillips
blair.phillips@affa.gov.au
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:03 EDT