From: rowan.bailey@bt.com
Date: Mon Jan 06 2003 - 03:14:46 EST
Thanks to everybody who responded.
general consensus was that there are no limits, which I kinda expected to be
the case.
useful suggestions:
Set the identifier on the HSG80 disks,
then using quickset to set boot device without doing a show.
5.9 Firmware has a similar problem ( we are on 6.3)
As this does not happen on my DS10 test cluster I am thinking that it maybe
a fault. I can test it again until the end of January and Compaq Engineering
have suggested some tests to perform then to try and discover the cause.
I will post an update when it is fixed.
Thanks again,
rowan.
_______________________________________________________________________
Rowan Bailey
BPM Systems
Xansa
t +44 (0) 121 230 8226
m +44 (0) 780 388 8820
f +44 (0) 709 213 5208
This email and any files transmitted with it are confidential and protected
by client privilege. It is solely for the use of the intended recipient.
Please delete it and notify the sender if you have received it in error.
Unauthorised use is prohibited. Any opinions expressed in this email are
those of the individual and not necessarily the organisation.
Xansa, Registered Office: Campus 300, Maylands Avenue, Hemel Hempstead, HP2
7TQ, UK.
Registered in England no. 1000954
t +44 (0)8702 416181
w <www.xansa.com>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:03 EDT