From: Stephen L LaBelle (labelles@mscd.edu)
Date: Tue Nov 19 2002 - 12:14:49 EST
Hello,
We just aquired a brand-new GS-80. Its got 2 building blocks
each with 3 CPU's and 6GB RAM. I intend to run it as a monolithic
system:
6 CPUs and 12GB RAM
It came factory loaded with TRU 64 V5.1A. I have since done another
V5.1A load on it. The factory load was on what is called a Fizz<SP> disk?
Here is the quirk:
It has a shelf with 8 disks in it. When I reloaded TRU64 I put the
O/S in the disks on that shelf. The thing boots fine etc. The device
files for all disks are there etc.
However the following command:
# hwmgr -scan scsi
and then
# hwmgr -show scsi
Does not show that any of the disks on that shelf exist? HWMGR shows
the CD-ROM, the Fizz disk, and two KGPSA fiber channel adapters only.
The O/S has no problems using/accessing the disks on that shelf.
HWMGR does not display them. Anyone have any thoughts/ideas. I expect
this is a known issue with a fix/patch/workaround?
Steve
########################################
# Stephen LaBelle #
# Server Administration Team #
# Metropolitan State College of Denver #
# Denver, Colorado USA #
# labelles@mscd.edu #
########################################
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:59 EDT