From: Jim Kurtenbach (KurtenbachJ@crlcorp.com)
Date: Mon Nov 18 2002 - 15:42:47 EST
Thanks all,
It appears that the tz89 and for that matter all tape drives are not
supported
in a HSG80. I have decided to locally attach this tape drive with a local
SCSI adapter.
Some reported success at using a Fibre to SCSI adapter. Something called a
Modular Data Router II or a Network Storage Router.
Jim
My original message:
===================================================
Greetings all,
I am trying to add a TZ89 SBB tape drive to our fibre fabric SAN. I have
done all the usuall stuff:
I am using selective storage presentation and do not have the switched ports
zoned.
Disks show up fine.
Anyone have any experience using a TZ89 in a HSG80?
Here's my config.
HSG804_BOT> run config
Config Local Program Invoked
Config is building its tables and determining what devices exist
on the subsystem. Please be patient.
add passthrough TAPE21100 2 11 0
Config - Normal Termination
HSG804_BOT> add unit p1 tape21100
HSG804_BOT> set p1 id=402
HSG804_BOT> sho p1
LUN Uses Used by
----------------------------------------------------------------------------
-- P1 TAPE21100 LUN ID: 6000-1FE1-0005-3CC0-FFFF-FFFE-0002-0B00 IDENTIFIER = 402 Access: ALL State: ONLINE to the other controller NOPREFERRED_PATH DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:59 EDT