From: Norris, Daniel (Daniel.Norris@gentiva.com)
Date: Fri Nov 08 2002 - 14:40:33 EST
The chvol(8) man page explains this well and is the utility used to
change it. Thanks to those that cleared this up for me. I've adjusted
our volumes to match the old parameters. Apparently, LSM devices and
disk block devices have different defaults. The "chvol -l" shows the
min and max values for rblk and wblk.
Dan
Dan Norris
Unix Engineering, Gentiva
Celeritas Technologies, LLC
913-814-2675
-----Original Message-----
From: Norris, Daniel
Sent: Friday, November 08, 2002 12:28 PM
To: tru64-unix-managers@ornl.gov
Subject: rblks and wblks in showfdmn
Can anyone tell me what determines the rblks and wblks seen in showfdmn?
We've added some hardware mirrors to our existing LSM mirrors in some
domains. In all cases, the HSG mirrorset shows up with different values
than the LSM mirrorset:
# showfdmn dd1
Id Date Created LogPgs Version Domain
Name
3bfeac60.00013c68 Fri Nov 23 14:06:56 2001 512 4 dd1
Vol 512-Blks Free % Used Cmode Rblks Wblks Vol Name
1L 71104512 31955696 55% on 512 512
/dev/vol/data1/d1v
2 71109616 71108416 0% on 256 256
/dev/disk/dsk101a
---------- ---------- ------
142214128 103064112 28%
Dan Norris
Unix Engineering, Gentiva
Celeritas Technologies, LLC
913-814-2675
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:59 EDT