Trouble with 4D51T video

From: McCracken, Denise (Denise.McCracken@misyshealthcare.com)
Date: Fri Nov 01 2002 - 16:50:52 EST

• Next message: Gerfried J. Kumbartzki: "converting UP2000 (Dual CPU) from Linux to Tru64 V5.1"
• Previous message: Sylvain Robitaille: "Can't boot restored 5.1A on an AS4000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

        I have an Intergraph Intense3D Pro2200 video card that is supposed
to be identical to the Powerstorm 4D51T, and is now installed in a 433au.
It does show up as a 4D51T in SRM as a PCI bridge, bus 0 to bus1, bus1 slot
4 is a Cateyes VGA daughterboard and bus1 slot 5 is a Cateyes 4D51T-1000.

        I am having problems in both 4.0f and 5.1a. I load the Compaq
drivers, the kernel recompiles and has support for the "ingr" device, but
when I reboot, I get this:

        pci1 (primary bus:0 subordinate bus:1) at pci0 slot 11
        ingr_vga0 at pci1 slot 4
        ingr0 at pci1 slot 5
        ingr0: Device failed during TP initialization.
        ingr0: Device failed during initialization.

        Tried booting from generic kernel, rebuilding kernel, powering down,
all the usual stuff, and I always get the same thing.

        Any ideas?

Thanks

Denise McCracken
MiSys Healthcare Systems
Denise.McCracken@misyshealthcare.com
(520) 570-2521

• Next message: Gerfried J. Kumbartzki: "converting UP2000 (Dual CPU) from Linux to Tru64 V5.1"
• Previous message: Sylvain Robitaille: "Can't boot restored 5.1A on an AS4000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:58 EDT