From: Rusdi (rusdi@komputeralif.com)
Date: Sat Oct 19 2002 - 04:28:11 EDT
Hi...Managers!
My 2nd server of my cluster system (2 servers) can't boot dan I got this
error message:
........
........
Reservation conflict for dkc 100.1.0.2.0
Read/Write failed with status 0002 on dra 0.0.0.4.1
Fail open file for dkc 100.1.0.0
Hard error -error#5
testing the sytem
Waiting for dra 0.0.0.4.1 to poll
Waiting for dra 0.0.0.4.1 to poll
Waiting for dra 0.0.0.4.1 to poll
Waiting for dra 0.0.0.4.1 to poll
Waiting for dra 0.0.0.4.1 to poll
Waiting for dra 0.0.0.4.1 to poll
exer_kid 0000153 dra 0.0.0.4.1 error in read at 06A location 0000002A000
from
the device 0.0.0.4.1
(Boot dra0.0.0.4.1 -flags A)
Read/write failed with status 0002 on dra 0.0.4.1
Failed to read dra 0.0.0.4.1
bootstrap failure
What is cousing problem ?
Thanks in advance for your help.
Rusdiyanto
----------------
Some Additional Information:
1. show dev :
dkc100.1.0.2.0 dkc100 HSZ80 V83Z
dqa0.0.0.15.0 DQA0 Compaq CRD-8402B
dra0.0.0.4.1 DRA0 2 member Raid1
dva 0.0.0.1000.0 DVA0
JKC607.6.0.2.0 JKC607 ASE AM DEC
mkb500.5.0.2001.1 MKB500 TLZ09 0305
pka0.7.0.2000.1 PKA0 scsi bus id 7
pkb0.7.0.2001.1 PKB0 scsi bus id 7
pkc0.7.0.2.0 PKC0 scsi bus id 7
2. Before above happened I did some recovery action to solve problem on my
external storage (HSZ80):
The error messages as follows:
"Previous controller operation terminated by power failure,
This controller has an invalid cache module"
Then we did recovery with typing this commands:
1. HSZ80>clear this invalid_cache no destroy_unflushed_data
2. Clear d100 lost_data
After I executed above commands, I could access to Share storage
(external storage) from 1st server, however then I have booting problem
on my 2nd server.
What is cousing problem ?
Thanks in advance for your help.
Rusdiyanto
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:56 EDT