From: Jim Kurtenbach (KurtenbachJ@crlcorp.com)
Date: Fri Oct 18 2002 - 11:49:38 EDT
Greetings all,
I am setting up a heterogeneos san in my test laboratory using
selective storage presentation (hsg80> set d1 enable=tru64_1,tru64_2). I
would like to use an old Alphaserver 400 and a KGPSA controller to run Tru64
v5.1a. I've gotten Tru64 v5.1a to run on a locally attached disk, for what
it's worth.
I have updated the firmware on this machine, but it still doesn't
have wwidmgr or any utilities at the >>> prompt. On the 4100, I had to
>>>set mode diag to gain access to wwidmgr. This doesn't work on the 400.
This is old hardware I know and may not be feasible, but I'm open to
any ideas.
Thanks in advance.
Jim
The SAN:
1) Brocade 2800
2) Alphaserver 4100, VMS 7.2
3) Windows i386 box, NT 4.0
4) HSG80/RA8000, ACS 8.5F
James Kurtenbach
Clinical Reference Laboratory
8433 Quivira
Lenexa, KS 66215
(913) 693 2508 (direct)
(913) 492 3652 (operator assisted)
kurtenbachj@crlcorp.com
DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying, or distribution of the message, or any
action or omission taken by you in reliance on it, is prohibited and may be
unlawful. Please immediately contact the sender if you have received this
message in error. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:56 EDT