From: Lisa.Morris@victorreinz.com
Date: Tue Sep 17 2002 - 09:17:11 EDT
I currently have an ES40 running 5.1A. I just purchased an ES45 system and
I am in the process of clustering these two systems together. I have an
HSG70 storage device on the 40 and an HSG80 on the 45. I would like to get
rid of the HSG70 but currently have a lot of files on this device. Within
the cluster right now, I do have these drives NFS mounted (until I get the
ES40 onto the cluster). I would like to create a com file (I'm a VMS
person) which would allow the user's to copy these files over individually
as needed. I also need this com file to modify the permissions on the file
so that every user can use/access these files. So, I am not sure how to
do this - what do I need to set the owner of the file to - the group to and
the permissions. Most of the files on the system has system as the owner
(a user always used the su to run his jobs - don't ask!!). My user's will
need full access to these files - most of the files are models and within
this group - there are only 4 users.
If anyone has any ideas on how this com procedure should look like or how I
should do it - I would appreciate it.
Lisa Morris
Dana Corporation
* * * * * L E G
A L D I S C L A I M E R * * * * *
WARNING: The information in this E-mail message is confidential and is
information intended only for the use of the individual(s) named above. If
you are not the appropriate recipient, you are hereby notified that you
should not further disseminate, distribute, or forward this E-mail message.
If you have received this E-mail message in error, please notify the sender
immediately. We have taken reasonable steps to ensure that this message
(and any attachments or hyperlinks contained within it) are free from
computer viruses and the like. However, in accordance with good computing
practice the recipient is responsible for ensuring that it is actually
virus free before opening it. Dana Corporation is under no duty to cover
any loss or damage caused by software viruses.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:53 EDT