From: rob.leadbeater@lynx.co.uk
Date: Fri Sep 06 2002 - 04:16:30 EDT
Hi,
Thanks to those responded: B Ingwersen,S Millard,P O'Brien, alan@nabeth
The general concensus is that provided you have the correct cables, and
mounting bracket the drive can be installed in a Proliant.
However the warranty on the drive will almost certainly become void.
Cheers,
Rob
-----Original Message-----
From: rob.leadbeater@lynx.co.uk [SMTP:rob.leadbeater@lynx.co.uk]
Sent: Thursday, September 05, 2002 4:09 PM
To: tru64-unix-managers@ornl.gov
Subject: OT: Reusing an SBB type TZ89
Hi managers,
Apologies for being slightly off topic, however I know someone here will
probably answer quickly !
For one reason or another we've got an SBB type TZ89 tape drive (DLT7000)
which is currently mounted in an external (BA356) shelf.
I would like to get this drive mounted internally in a Proliant 5500R, to
free space up in the rack - the shelf is only being used for the DLT.
Can the TZ89 be removed from its SBB mounting, and reused ?
Cheers,
Rob Leadbeater
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:51 EDT